Panasonic AG-UMR20P Operating Instructions Manual page 168

Bandwidth control (bitrate)
Select the amount of data to be distributed.
Setting value:
Unlimited, 1024kbps, 2048kbps, 4096kbps, 8192kbps, 16384kbps, 32768kbps
Factory settings: Unlimited
Easy IP Setup accommodate period
Select [20min] or [Unlimited] as the time for enabling the operation of the network settings from the Easy IP Setup
Software.
Setting value:
The setting operations from the Easy IP Setup Software are enabled for 20 minutes after the camera
20min
has started operating.
Unlimited The setting operations from the Easy IP Setup Software are enabled at all times.
Factory settings: 20min
RTSP port
Assign a TCP communication port number used for RTSP initial negotiation.
Factory range: 1 to 65535
The following port numbers are used by the unit so they cannot be used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670, 59000 to 61000
Factory settings: 554
≥ The unit also supports general RTSP protocols.
Listed below are the URLs for RTSP requests.
Request URL
rtsp://<IP address>/mediainput/h264/stream_1
rtsp://<IP address>/mediainput/h264/stream_2
≥ The following RTSP methods are supported.
j OPTIONS
j DESCRIBE
j SETUP
j PLAY
j PAUSE
j GET_PARAMETER
j TEARDOWN
* SET_PARAMETER is not supported. An error will be returned.
Images set with [H.264(1)]
Images set with [H.264(2)]
*
- 168 -
Description
(l 149) can be requested.
(l 149) can be requested.