Panasonic AG-UMR20P Operating Instructions Manual page 171

NTP server address
When [Manual] is selected in the [NTP server address setting], input the IP address or host name of the NTP server.
Maximum number of characters
Characters that can be entered
Factory settings: blank
≥ To input the [NTP server address] host name, the [DNS] setting must be selected on the [Network] tab of the
network setup screen [Network]
NTP port
Input the port No. of the NTP server.
Port Nos. that can be selected: 1 to 65535
The following port numbers are used by the unit so they cannot be used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 554, 995, 10669, 10670, 59000 to 61000
Factory settings: 123
Time adjustment interval
Selects the interval (1 to 24 hours in 1-hour increments) for acquiring the time from the NTP server.
Factory range: 1h to 24h
Factory settings: 1h
¥ UPnP
This unit supports UPnP (Universal Plug and Play). Using
the UPnP function allows the following to be set
automatically. This item's setting is reflected when the [Set]
button is pressed.
≥ Sets the router's port forwarding function. (However, a
UPnP-compatible router is necessary.)
This setting is useful when accessing the Camera Head
or the unit from the internet or a mobile terminal.
Auto port forwarding
Whether to use the router's port forwarding function is set by selecting "On" or "Off".
To use the automatic port forwarding function, the used router must support UPnP and the UPnP function must be
enabled.
Factory settings: Off
≥ The port number may be changed by automatic port forwarding. If the number is changed, the port No. of the
Camera Head or the unit registered to the PC or the unit must be changed.
≥ To confirm that automatic port forwarding is correctly set, click the [Status] tab in the maintenance screen
[Maintenance] to confirm that the [UPnP] status is set to [Enable].
If [Enable] is not displayed, refer to "No access is possible from the web browser" in the "Troubleshooting"
0 to 128 half-size characters
Half-size alphanumeric characters, half-size symbols : . _ -
(l 167).
- 171 -
(l 185)
(l 246).