Table of Contents
Advertisement
[DRS]
Selects the DRS (Dynamic Range Stretcher) function.
The dynamic range can be expanded by compressing the level of the video signals in high-brightness areas where
overexposure occurs during normal recording.
1
Touch [DRS].
2
Touch
/
to change the setting.
[OFF]/[LOW]/[MID]/[HIGH]
≥ The compression level of the high brightness becomes larger and noise in the dark becomes larger going toward
[HIGH].
3
Touch [EXIT] to exit the menu screen.
≥ If there are extremely dark or bright parts or the brightness is not sufficient, the effect may not be clear.
[NR CONTROL]
You can control the noise reduction effect and afterimage intensity by adjusting the noise reduction setting.
1
Touch [NR CONTROL].
2
Touch
/
to adjust settings.
≥ You can select a value between s7 and r7.
≥ Adjusting the setting in the minus (s) direction weakens the noise reduction effect, thereby reducing afterimages.
Note that this also tends to increase noise.
≥ Adjusting the setting in the plus (r) direction enhances the noise reduction effect, thereby reducing noise. Note that
this may also cause afterimages to appear more frequently.
3
Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [AUTO] in [SELECT SCENE] is "0".
- 206 -
Advertisement
Table of Contents
