JVC UX-GD6M Service Manual page 19

3.1.19 Removing the front panel board
(See Figs.26 and 27)
• Remove the metal cover and front panel assembly.
(1) From the front side of the front panel assembly, pull out the
volume knob in the direction of the arrow. (See Fig.26.)
(2) From the inside of the front panel assembly, remove the
nine screws Z and screw Z' attaching the front panel board.
(See Fig.27.)
Reference:
When attaching the screw Z', attach the support board
with it. (See Fig.27.)
(3) Take out the front panel board while releasing the claws p
in the direction of the arrow. (See Fig.27.)
Front panel assembly
Volume knob
Fig.26
Z
Z
Front panel board
Fig.27
Front panel assembly
p
Support board
Z'
p
Z
(No.MB408)1-19