Panasonic BT-M1950Y Service Manual page 25

Setting value change
• Set for displaying the adjustment mode menu or the
adjustment mode sub-menu.
1. Press the right arrow [~) to change the adjustment value
in the
+
direction.
2. Press the left arrow [~) to change the adjustment value in
the - direction.
3. Press the up [
j J
or down arrow [
J, l
to change the
adjustment item.
4. Press Menu to return the set-up main menu. (At the
adjustment mode sub-menu, again press Menu.)
Set-up menu exit
1. When settings are complete, press Menu.
2. The screen display extinguishes and the set-up menu is
exited.
Set-up menu checks
• White balance
To check if adjustment has changed:
1. Press Menu to display the user main menu.
2. If an asterisk
n
appears at the Color Temp. item, the
setting has been changed.
• Set-up menu initialize
To return changed Size/Centering and White Balance
Adjust to original status (initialize);
1. Hold the mainframe down arrow [
J,)
and Menu
depressed, and set power on (inoperable from remote
controller).
2. The initialize menu is displayed (hold depressed until
menu appears).
3. Select Set-up Menu Reset and press Enter.
4. The set-up reset menu is displayed.
5. Press Enter to return the standard settings. Note that
Remote Elect, Status Display and Control Lock are
initialized and ID No. is cleared to
o.
-25-
< MENU>
ASPECT RA TIO
COLOR TEMP.
:4-3
:6500*
RGB/COMPONENT : RGB
User main menu
<INITIALIZE MENU>
ID NUMBER SET
• <SET-UP MENU> RESET
Initialize menu
<SET-UP MENU> RESET
Are you sure 7
"Yes" then [ENTER)
"No" then [~]or(~]
Set-up reset menu
1::H·M1950Y