Panasonic BT-M1950Y Service Manual page 15

•
@
0 0
@ @
@ @
G)
G)
Ground Screw
TabCD
Tab(V
Tab@
DB
TabG)
Tab
CV
Tab@
Ground Screw
D 1-1v1 I :1;:JU T
• Input PWB
1. Remove the top cover and rear panel.
2. Take out 2 screws©.
3. While pressing the lower signal PWB, pull upward and
remove the input PWB. Use care regarding the tabs and
engage the PWB to enable powered checks .
• Power supply PWB
1. Remove the top cover and rear panel.
2. Take out 2 screw (D.
3. While raising the PWB, insert a screwdriver or similar tool
to disengage tabs 1, 2 and 3, then remove the PWB.
• Deflection PWB
1. Remove the top cover and rear panel.
2. Take out 1 screw (D.
3. While raising the PWB, insert a screwdriver or similar tool
to disengage tabs 1, 2 and 3, then remove the PWB.
-15-