Related Manuals for Panasonic BT-LS1400
Summary of Contents for Panasonic BT-LS1400
- Page 1 Liquid Crystal Video Monitor BT-LS1400 POWER MENU/ INPUT SCAN BLUE EXIT ENTER MENU VOLUME Before attempting to connect, operate or adjust this product, please read these instructions completely. Printed in Japan VQT0F29...
-
Page 2: For Your Safety
For your safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”... -
Page 3: Table Of Contents
OPERATION AT A VOLTAGE IN THE RANGE OF 220 – 240 V AC MAY REQUIRE THE USE OF A DIFFERENT AC PLUG. PLEASE CONTACT EITHER A LOCAL OR FOREIGN PANASONIC DISTRIBUTOR FOR ASSISTANCE IN SELECTING AN ALTER- NATE AC PLUG. SHALL... -
Page 4: Precautions For Use
Precautions for use This product has been specially designed for commercial use. As such, it should be used and operated only by persons with related expertise. ¥ ¥ The liquid crystal parts are fabricated using high-precision technology. The screen has effective pixels that cover more than 99.99% of its area, but pixels may be missing or remain permanently lighted (red, blue and/or green) in less than 0.01% of the area. -
Page 5: Introduction
Introduction The BT-LS1400 commercial-use LCD video monitor features a 14 v-type LCD screen, a slim and lightweight design, and a wide angle of view. Its connectors support not only standard NTSC signal input but S-Video, 480i , P component signal input and SD SDI (optional) input as well. -
Page 6: Parts And Their Functions (Rear Panel)
This screw hole is for attaching the clamp for the power cord. Refer to the following when attaching the clamp. > REMOTE < Place the power cord in the accessory clamp. Fix the clamp to the monitor using the screw provided. -
Page 7: How To Use The On-Screen Menus
This menu is used to set the backlight brightness, status displays, input switching skip and REMOTE ON or OFF. MAINTENANCE This menu is used to display the running time of the LCD monitor. 5 [INPUT] The currently selected signal—whether LINE A, LINE B, CMPNT or SDI (optional)—is displayed here. -
Page 8: Picture Menu
How to use the on-screen menus ¥ PICTURE menu The menu items shown below appear when the PICTURE menu is selected on the main menu. [PICTURE MENU] MODE BROADCAST CONTRAST BRIGHT CHROMA PHASE SHARPNESS COLOR TEMP 3D Y/C [LORD FACTORY] MODE The video mode is selected here. -
Page 9: System Config Menu
How to use the on-screen menus ¥ VIDEO CONFIG menu The menu items shown below appear when the VIDEO CONFIG menu is selected on the main menu. [VIDEO CONFIG] ASPECT 16:9 COMPONENT LEVEL SMPTE ¥ SYSTEM CONFIG menu The menu items shown below appear when the SYSTEM CONFIG menu is selected on the main menu. [SYSTEM CONFIG] BACKLIGHT STATUS DISPLAY CONTINUE... -
Page 10: Remote Specifications
≥ operations) This switches the aspect ratio. Standby function (level operations) ≥ This blacks out the monitor while the power is on in order to prevent images from being burned onto the screen. Tally function (level operations) ≥ This enables the tally lamp to light up red. -
Page 11: About The Stand
The stand attached to the unit can be tilted forward 10° and back 20°. When tilting the monitor, firmly press down on the stand and grasp the top part of the monitor. Further, it is recommended to secure the stand using the screw holes when it is to be permanently located. -
Page 12: Maintenance
≥ ≥ Wipe off any dust or dirt on the monitor and LCD panel with a soft cloth. For stubborn dirt or stains, wipe the monitor and LCD panel with a cloth that has been lightly dampened with well-diluted kitchen detergent and wrung out thoroughly, then finish it off with a dry cloth. The monitor may malfunction if even one drop of water gets into the internals. -
Page 13: Specifications
Dimensions (Wa a Ha a D): 14 a 12-1/8 a 2-13/16 inch (main unit only) (356 a 308.5 a 71.5 mm) 14 a 13-3/8 a 7-3/8 inch (with monitor stand) (356 a 340 a 187 mm) Weight: 10.5 lbs (4.6 kg) (main unit only) 12.4 lbs (5.6 kg) (with monitor stand) - Page 14 Memo...
- Page 15 Memo...
- Page 16 PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835...