Digital Detector; Physical Characteristics - GE Optima XR220amx Operator's Manual

DRAFT

Digital Detector

Physical Characteristics

x
Single panel (non-tiled) amorphous silicon detector with a Cesium Iodide scintillator
x
Detector battery can take up to 45 exposures per hour and provide enough power for 3 hours of use
on a single charge
x
Detector can support up to 150Kg (330 lbs) of distributed load for bariatric applications
x
Includes 6:1 removable grid
x
Includes QAP (Quality Assurance Procedure)
x
Dimensions:
– Length: 23.1 inch (580mm)
– Height: 17.8 inch (452mm)
– Thickness: 0.94 inch (24mm)
x
Weight:
– Detector: 4,309 g (9.5 lbs.)
– Battery: 227g (0.5lbs.)
x
Tether Length: 4m
x
Image area: 40.4cm x 40.4cm (15.9inx15.9in)
x
Active matrix: 2022 x 2022 pixels
x
Image Depth TBD Bit
x
Raw Image File Size: 8mb
x
Pixel Pitch: 200 microns
x
Typical Upper Dynamic Range: 7.8mR
x
Typical DQE @ 0lp/mm: 68%
Communication
x
Wireless point-to-point network between the system and detector for transferring image data
x
Communication over wide 500MHz channels to achieve very high data rates
x
Low output power to limit range to less than 10 meters to increase safety and spectrum reuse
x
Designed to co-exist with 802.11 networks without interference
x
Frequency: 3.168-4.752GHz. Uses Band Group 1.
x
Max Power Output: -41.3dBm
x
Max PHY Data rate: 480 Mbps
x
Effective Throughput: 30-70 Mbps
x
Standards: WiMedia PHY spec v1.2, WiMedia MAC spec v1.0, Certified Wireless USB spec v1.0
Optima XR220amx X-Ray System
Operator Manual
CTRL+SHIFT+F to search using Search Index (faster)
54400222-1EN Rev 1 DRAFT 11092010
© 2010 General Electric Company. All rights reserved.
REVIEW COPY
Appendix B: Specifications
B-3