Identification And Compliance Plates - GE Optima XR220amx Operator's Manual

DRAFT
Table 2-8 Collimator descriptions
Symbol

Identification and Compliance Plates

Product identification labels can be found on the system. The types of system identification compliance
plates are located in the table below.
Identification Plate
Figure 2-2 Typical identification plate
Figure 2-3 Typical identification plate
Optima XR220amx X-Ray System
Operator Manual
CTRL+SHIFT+F to search using Search Index (faster)
Indicates the collimator blades are open. The controlled blades are shown in
thicker lines.
Indicates the use of laser radiation.
54400222-1EN
© 2010 General Electric Company. All rights reserved.
Chapter 2: Safety and Regulatory
Description
Rev 1 DRAFT 11092010
REVIEW COPY
2-16