Pollution Control Label; Dose Chart - GE Optima XR220amx Operator's Manual

DRAFT

Pollution Control Label

The following product pollution control information is provided according to SJ/T11364-2006 Marking for
Control of Pollution caused by Electronic Information Products.
Figure 2-16 Pollution control symbol
This symbol indicates the product contains hazardous materials in excess of the limits established by the
Chinese standard SJ/T11363-2006 Requirements for Concentration Limits for Certain Hazardous Sub-
stances in Electronic Information Products. The number in the symbol is the Environment-friendly Use
Period (EFUP), which indicates the period during which the toxic or hazardous substances or elements
contained in electronic information products will not leak or mutate under normal operating conditions
so that the use of such electronic information products will not result in any severe environmental pollu-
tion, any bodily injury or damage to any assets. The unit of the period is Year.
In order to maintain the declared EFUP, the product shall be operated normally according to the instruc-
tions and environmental conditions as defined in the product manual, and periodic maintenance sched-
ules specified in Product Maintenance Procedures shall be followed strictly.
Consumables or certain parts may have their own label with an EFUP value less than the product. Peri-
odic replacement of those consumables or parts to maintain the declared EFUP shall be done in accor-
dance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must be collected separately
and handled properly after decommissioning.

Dose Chart

Use the table below to compare film speed to dose values.
Table 2-18 Dose Chart
Expected receptor Default Dose (μGy) at 80 kVp
is less than:
Optima XR220amx X-Ray System
Operator Manual
CTRL+SHIFT+F to search using Search Index (faster)
16.00
12.90
10.00
8.00
6.25
5.00
54400222-1EN Rev 1 DRAFT 11092010
© 2010 General Electric Company. All rights reserved.
REVIEW COPY
Chapter 2: Safety and Regulatory
Equivalent Film Speed
100
125
160
200
250
320
2-27