Preference / Video Settings - GoVideo RV4000 User Manual

DWL71D1D_RV4000(GB) 04.6.1 1:46 AM 페이지27

PREFERENCE / Video Settings

1
Press [SETUP].
2
Use [œ/√] to select the 'Preference' option.
3
While the 'Preference' option is selected, press [†] to select the 'Video'
option.
3
Press [ENTER]. Video sub menu appears.
TV Aspect Ratio
1
Use [.../†] to select 'TV Aspect' while Video submenu
displays.
2
Press [ENTER] or [√] to go to the second level.
3
Use [.../†] to select the desired TV Aspect.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 LB :
Select when a standard 4:3 TV is connected. Displays
theatrical images with masking bars above and below the picture.
4:3 PS :
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
16:9 :
Select when a 16:9 wide screen TV is connected.
Auto :
Convert to the appropriate aspect ratio automatically.
Scan Mode
Progressive Scan Video provides the highest picture quality with
reduced flickering.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT
jacks, but are connecting the DVD Recorder+VCR to a
standard (analog) television, select Scan Mode as Interlace.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT
jacks for connection to a TV or monitor that is compatible
with a Progressive Scan signal, select Scan Mode as
Progressive.
Follow the same procedure as TV Aspect Ratio to change the Scan Mode.
Caution
Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible
TV or monitor. Press [P.SCAN] on the Remote Control for 3 seconds.
Initial Setup
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Enter-Confirm Setup-Exit
Move ...†
Video
TV Aspect Auto
Select Picture
Scan Mode Interlace Format
4:3 LB
4:3 PS
16:9
Instructions
Auto
Enter-Confirm Setup-Exit Move ...†
Video
TV Aspect Auto
Scan Mode Interlace
Select Scan
Mode
Interlace
Progressive
Instructions
Enter-Confirm Setup-Exit Move ...†
27