Recording Options Settings - GoVideo RV4000 User Manual

DWL71D1D_RV4000(GB) 04.6.1 1:46 AM 페이지25

RECORDING OPTIONS Settings

DVD Record Quality
You can set the default DVD recording quality to: HQ (High, 1
hr/disc), SP (Standard, 2 hrs/disc), EP (Low, 4 hrs/disc) or SLP
(Very Low, 6hrs/disc).
1
Press [SETUP].
The Setup menu appears.
2
Use [œ/√] to select the 'Recording Options' option.
3
While the 'Recording Options' is selected, press [†] to
select the 'DVD Record Quality' option.
4
Press [ENTER] to move to the second level.
5
Use [.../†] to to select the desired Record Quality (SP, SLP, EP, HQ).
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
VCR Record Quality
You can set the default VCR recording quality to SP (Standard
Play) or SLP (Super Long Play). SP is higher quality, but SLP
provides 3 times the recording time;
e.g., a 2 hour tape will record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
Auto Chapter
During recording, chapter markers are added automatically at
fixed intervals. You can set this interval to 5 minutes, 10 minutes
or 15 minutes. To turn off automatic chapter marking, select 'Off'.
Follow the same procedure as the DVD Record Quality.
Initial Setup
Recording Options
DVD Record Quality HQ
Select Record
VCR Record Quality SLP
Quality
Auto Chapter Off
SLP
EP
Instructions
SP
Enter-Confirm Setup-Exit
HQ
Move ...†
Recording Options
DVD Record Quality HQ
VCR Record Quality SLP
Select VCR
Auto Chapter Off
Quality
SLP
Instructions SP
Enter-Confirm Setup-Exit
Move ...†
Recording Options
DVD Record Quality HQ
Select Auto
VCR Record Quality SLP
Chapter
Auto Chapter Off
Off
5min
Instructions
10min
Enter-Confirm Setup-Exit
15min
Move ...†
25