Vcr Recording; Basic Recording - GoVideo DVR5000 User Manual

Basic Recording

You can record a TV show in
progress by inserting a blank
tape and pressing the Record
button. You can even add time
in fixed 30-minute increments
by pressing the Record button
repeatedly; see page 71.
NOTE: Be sure you videotape
has a Record Safety Tab. If
the tab is missing, you can
cover the opening with a
small piece of tape. Warning:
Do not cover this opening
unless you are sure you want
to record over the tape.
Before You Begin...
• Power on the DVD-VCR
• Power on the TV
• Set the TV to channel 3 or 4 (whichever the switch is set to on the back of the DVD-VCR).
1
Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the
entire program. To change the Recording Speed, see
page 72.
2
Select a Channel to Record
Use the 0–9 buttons or the Channel Up/Down arrow
keys to select the desired channel, or press the TV View
button to select Line 1 or Line 2 if recording from an
external device connected to the front or rear Line
inputs, respectively.
3
Start Recording
Press the Record button on the remote control or front
panel. For options while recording is in progress, see
"Special Recording Features" on the next page.

9 - VCR Recording

9 - VCR RECORDING
69