Vcr Recording; Basic Recording - GoVideo DV2130 User Manual

Basic Recording

You can record a TV show in progress by inserting a blank tape and
pressing the REC button. You can even add time in 30-minute
increments up to 9 hours and 30 minutes by pressing the REC
button repeatedly; see page 57.
NOTE: Be sure your videotape has a Record Safety Tab. If the tab
is missing, you can cover the opening with a small piece of
tape. Warning: Do not cover this opening unless you are
sure you want to record over the tape.
Before You Begin...
• Power on the DVD+VCR
• Power on the TV
• Set the TV to channel 3, 4 or Line .
1 Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the entire program.
To change the Recording Speed, see page 57.
2 Select a Channel to Record
Use the 0–9 buttons or the CHANNEL
select the desired channel, or press the TV VIEW button to
select Line 1 or 2 if recording from an external device connected to
the front or rear Line inputs, respectively.
3 Start Recording
Press the REC button on the remote control or front panel.
For options while recording is in progress, see "Special Recording
Features" on the next page.
To record from the DVD player to the VCR use the
COPY button. It is not permissible to copy
Macrovision-encoded DVDs.
/
buttons to
ENTER
ENTER
3 REC SP/SLP CLEAR
SUBTITLE MODE ANGLE
LAST CH REPEAT TIMER SEARCH/IDX
1
EJECT
W STOP FF REC COPY
3
2
DISC MENU
MARK
DVD VCR CH SETUP L
55