Distribute The Alarm Message - Bosch Plena Installation And User Instructions Manual

Plena Voice Alarm System | Installation and User Instructions | Operation
To select all zones, push the All call button on the front
panel of the voice alarm controller or the remote
controls (see figure 27.9)
Alert message
Alarm message
EMG mic
figure 27.9: All call button
27.5.4.3 Start the alert message
Push the Alert message button on the front of the voice
alarm controller or the remote controls to distribute the
the default alert message (see figure 27.10). The message
is only distributed to the selected zones (see 27.5.4.2).
• If the red Alert message indicator is off, the alert
message is not distributed. Push the Alert message
button to distribute the default alert message.
• If the red Alert message indicator is on, the message
is distributed. Push the Alert message button to stop
distributing the default alert message.
Alert message
Alarm message
EMG mic
figure 27. 1 0: Alert message button
Bosch Security Systems | 2006-06 | 9922 141 10377 en
All call
Indicator test
All call
Indicator test

27.5.5 Distribute the alarm message

Distributing the default alarm message is similar to
distributing the default alert message (see section
27.5.4). Push the Alarm message button instead of the
Alert message button (see figure 27.11). The alarm
message can also be distributed by pushing the Alarm
Message button on the fireman's panel.
Alert message
Alarm message
EMG mic
figure 27. 1 1: Alarm message button
en | 94
All call
Indicator test