10 ]Disassembling The Frame Assy - Brother PT-D600 Service Manual

[ 10 ]Disassembling the Frame ASSY

(1) Remove the retaining ring E2 to remove the ribbon drive cam and the ribbon drive
gear from the frame ASSY. Remove the ribbon clutch spring TZA24 from the ribbon
drive cam.
Assembling Note:
Adjust the straight end of the ribbon clutch spring TZA24 to the slit on the ribbon
drive gear.
(2) Remove the retaining ring E1.5 to remove the double gear 3, the idle gear.
(3) Remove the retaining ring washer 3 T0.5 to remove the tape drive gear TZA24.
Ribbon drive cam
Ribbon clutch
spring TZA24
Straight end
Ribbon drive gear
Slit
Ribbon drive cam
Ribbon drive gear
Frame ASSY
Figure 3.1-14
Retaining ring E2
Ribbon clutch spring TZA24
Retaining ring E1.5
III - 16
Double gear 3
Idle gear
Retaining ring
washer 3 T0.5
Tape drive gear TZA24