Key Commands For Special Functions; Initializing; Inspection Mode - Brother PT-D600 Service Manual

1.3 Key commands for Special Functions

1.3.1

Initializing

Inside RAM is cleared by pressing the following key simultaneously at power-off state,
and the content of character edit in the machine mode is initialized.
For European/North American models: [Space] + [BS] + [ON/OFF]
1.3.2

Inspection Mode

After inside RAM is cleared, enter the factory inspection mode by pressing the
following key simultaneously at power-off state. (When the machine enters the factory
inspection mode, the LCD displays as shown in
For European/North American models: [Space] + [Clear] + [ON/OFF]
FACTORY CHECK
Figure 1.3-1 Factory Inspection Mode
I - 6
<Figure 1.3-1>.)