Cisco IE 4010 Hardware Installation Manual page 31

Switch Installation
Installing and Removing SFP Modules
Figure 17 Installing an SFP Module
Caution: Do not remove the dust plugs from the fiber-optic SFP module port or the rubber caps from the fiber-optic
cable until you are ready to connect the cable. The plugs and caps protect the SFP module ports and cables from
contamination and ambient light.
Installing 100/1000BASE-T SFP Modules
Table 9 100/1000BASE-T SFP Modules
Model Number
GLC-T
GLC-TE
The 100/1000BASE-T (copper) SFP transceiver, see
secures the transceiver in the module socket. The SFP network interface is an RJ-45 connector.
C i s c o IE
3 0 1 0
Downlink Support
10/100/1000
10/100/1000
Figure 18 on page
27
Uplink Support
10/100/1000
10/100/1000
28, has a bale-clasp locking mechanism that