Clean The Everest 400 Printer; Clean The Print Head - Rimage Professional 3400 User Manual

Clean the Everest 400 Printer

Regular cleaning helps to keep your Everest 400 printer in opti mal operati ng conditi on.

Clean the Print Head


Tools required:
• Sponge swabs with long handles (included in the Everest cleaning kit)
• 99% Isopropyl alcohol
1. Access the print head.
a. Lift the printer cover latch to open
the cover.
b. Lower the printer cover.
c. Turn the center latch
counterclockwise to unlock it.
d. Remove the print ribbon carrier.

Important! The ribbon carriers
cannot be removed from the
printer unless the system is
powered on.
2. Clean the print head.

Cauti on! Do not scratch the print head. Remember the following ti ps:
• Always wipe from one end of the print head to the other without stopping in the middle.
• Only wipe the area indicated.
a. Apply isopropyl alcohol to the sponge swab.
b. Use the sponge swab to wipe across the print head from one end to the other in the directi on shown below.

Note: Do not remove the print head component from the inside of the printer. The component is shown
outside of the printer for instructi onal purposes only.
c. Repeat as needed unti l the print head is clean of dust and debris.
d. Use the sponge swab to remove any waxy buildup from the roller below the print head.
2001431_A
Print Ribbon
Print Head
Carrier
Area to Clean
Roller
Center Latch
Wipe Directi on
37