Install The Retransfer Ribbon - Rimage Professional 3400 User Manual

Rimage Professional 3400 and 5400N User Guide
c. Lift up on the supply roll to remove it from the left side
of the carrier.
d. Set the supply roll aside.
e. Lift the retransfer ribbon carrier off of the used
retransfer ribbon and set it aside.
f. Discard the used retransfer ribbon.

Install the Retransfer Ribbon

1. Remove the new retransfer ribbon from the packaging.
2. Positi on the retransfer ribbon on the retransfer ribbon
carrier.
a. With the supply roll on the left side, unwind several
inches of the retransfer ribbon.
b. Place the retransfer ribbon on a clean, fl at surface.
c. Place the retransfer ribbon carrier on top of the
retransfer ribbon.
3. Install the retransfer ribbon.
a. Bring the take-up roll up and around the guide
roller on the right side of the carrier.
b. Press down to install the take-up roll, as shown.
32
Used Supply Roll
New Supply Roll
Retransfer Ribbon Carrier
Take-Up Roll
New Take-Up Roll
Guide Roller
2001431_A