Alcatel-Lucent 7210 SAS-D Configuration Manual page 74

Monitor CLI Commands
-------------------------------------------------------------------------------
1/1/1
1/1/2
1/1/3
-------------------------------------------------------------------------------
Totals
===============================================================================
A:ALA-12#
management-access-filter
Syntax management-access-filter
Context monitor
Description
This command enables the context to monitor management-access filters. These filters are configured
in the config>system>security>mgmt-access-filter context.
ip
Syntax ip entry entry-id [interval seconds] [repeat repeat] [absolute | rate]
Context monitor>management-access-filter
Description Platforms Supported: 7210 SAS-D and 7210 SAS-E.
This command nonitors statistics for the MAF IP filter entry.
Parameters
entry entry-id — Specifies an existing IP MAF entry ID.
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the raw statistics are displayed, without
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
Page 74
0 0
258 3
82 1
340 4
Values
1 — 9999
Default
10
Values
3 — 60
Default 10
Values
1 — 999
processing. No calculations are performed on the delta or rate statistics.
of the delta.
7210 SAS D, E, K OS Basic System Configuration Guide
0 0 0
86 1 0
0 0 0
86 1 0
0
0
0
0