Accessing The Cli; Console Connection; Table 14: Console Configuration Parameter Values - Alcatel-Lucent 7210 SAS-D Configuration Manual

Accessing the CLI

To access the CLI to configure the software for the first time, follow these steps:
•
•

Console Connection

To establish a console connection, you will need the following:
•
•

Table 14: Console Configuration Parameter Values

Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Figure 11
7210 SAS D, E, K OS Basic System Configuration Guide
When the power to the chassis is turned on, the 7210 SAS software automatically begins
the boot sequence.
When the boot loader and BOF image and configuration files are successfully located,
establish a router connection (console session).
An ASCII terminal or a PC running terminal emulation software set to the parameters
shown in the table below.
A standard serial cable connector for connecting to a RS232 port (provides a RJ45
connector).
Parameter
115,200
8
None
1
None
displays an example of the Console port on a 7210 SAS-E front panel.
Value
Boot Option Files
Page 141