Alcatel-Lucent 7210 SAS-D Configuration Manual page 414

System Commands
Page 414
Label
Config Source
Last Booted Config
File
Last Boot Cfg Ver-
sion
Last Boot Config
Header
Last Boot Index
Version
Last Boot Index
Header
Last Saved Config
Time Last Saved
Changes Since Last
Save
Time Last Modified
Max Cfg/BOF Backup
Rev
Cfg-OK Script
Cfg-OK Script Sta-
tus
Cfg-Fail Script
Cfg-Fail Script
Status
7210 SAS D, E, K OS Basic System Configuration Guide
Description (Continued)
Primary — Indicates that the directory location for configuration
file was loaded from the primary source.
Secondary — Indicates that the directory location for configuration
file was loaded from the secondary source.
Tertiary — Indicates that the directory location for configuration
file was loaded from the tertiary source.
The URL and filename of the last loaded configuration file.
The date and time of the last boot.
Displays header information such as image version, date built, date
generated.
The version of the persistence index file read when the card was last
rebooted.
The header of the persistence index file read when the card was last
rebooted.
The location and filename of the last saved configuration file.
The date and time of the last time configuration file was saved.
Yes — There are unsaved configuration file changes.
No — There are no unsaved configuration file changes.
The date and time of the last modification.
The maximum number of backup revisions maintained for a configura-
tion file. This value also applies to the number of revisions maintained
for the BOF file.
URL — The location and name of the CLI script file executed follow-
ing successful completion of the boot-up configuration file execution.
Successful/Failed. The results from the execution of the CLI
script file specified in the Cfg-OK Script location.
Not used — No CLI script file was executed.
URL — The location and name of the CLI script file executed follow-
ing a failed boot-up configuration file execution.
Not used — No CLI script file was executed.
Successful/Failed — The results from the execution of the
CLI script file specified in the Cfg-Fail Script location.
Not used — No CLI script file was executed.