TABLE 12: Electrical Data For Single Source Power Supply: 208/230-3-60
Air Handler Models
25B
37B
37C
38B
38C
49C
49D
50C
50D
61C
61D
NOTES:
1. 6HK3 = 3-Phase with terminal block connections only, 6HK4 = 3-Phase with service disconnect
2. MOP = Maximum Overcurrent Protection device; must be HACR type circuit breaker or time delay fuse. The 1st circuit includes blower motor amps. Refer to the
latest edition of the National Electric Code or in Canada the Canadian electrical Code and local codes to determine correct wire sizing.
3. The 20kW and 25kW heater models (6HK46502025 and 6HK46502525) come with circuit breakers standard. Single source power MCA and MOP requirements
are given here only for reference if used with field installed single point power modification..