Extron electronics DTP CrossPoint 108 4K User Manual page 43

Example 4: Viewing video and audio, audio only, and video only ties
The following example shows how to view the video and audio, audio only, and video only
ties in the current configuration. The steps show the front panel indications that result from
your action.
NOTE: This example assumes that you have performed
example 2 on page 32, and
1. Clear all selections: Press and release the
2. Select View-only mode: Press and release the
red.
3. Select video and audio for viewing: Press and release the
button as necessary to light both.
Audio
Press the Video button
to toggle on and off.
VIDEO
The button lights green
when selected.
Until you select an input, the buttons for all untied outputs
light the appropriate color:
Amber if no inputs are tied (not shown in this example)
Green if no video inputs are tied (only audio is tied)
Red if no audio inputs are tied (only video is tied).
1 2 3 4 5
OUTPUTS
4. Select an input: Press and release the
Press the button. It lights amber.
1 2 3 4 5
1 2 3 4 5
OUTPUTS
The output buttons for outputs that are not tied to input 5 are
either unlit or background illuminated.
NOTE: You can also view a set of ties by selecting a tied output. Demonstrate this
as follows:
1. Note the number of a lit output button, and then press and release the output
button for an untied (unlit or background illumination) output.
2. Observe that all of the untied outputs light.
3.
Then press the output button that you noted previously.
4. Observe that the selected output button, the tied input button (input 5), and the
output buttons light for all of the outputs that are tied to the input.
example 3 on page 33.
button.
Esc
View
Press the Audio button
I / O
to toggle on and off.
AUDIO
The button lights red
when selected.
6 7 8
button.
Input 5
INPUTS
6 7 8 9 10
The output buttons for outputs that are tied to
input 5 light or blink the appropriate color:
Amber for audio and video ties (audio follow)
6 7 8
Green for video ties (audio breakaway)
Red for audio ties (audio breakaway, not
shown in this example)
DTP CrossPoint 4K Series Matrix Switchers • Operation
example 1
on page 31 and
button. The button lights
View
button and the
Video
35