Controls - Genie Z-34/22 Operator's Manual

Fourth Edition • Third Printing
4
3
DRIVE
ENABLE
OPERATION
2
Light on indicates that boom
has moved past a non-steer
tire and drive function is
turned off.
To drive, hold drive enable
switch up or down and
slowly move drive control
handle. Machine may drive
in opposite direction that
the drive and steer controls
are moved.
Use color-coded direction
arrows on this panel and
drive chassis to identify the
direction machine will travel.
1
21
Platform Control Panel
1 Drive enable switch
2 Drive enable indicator light
3 Auxiliary power switch
4 Platform level switch
5 Horn button
6 Primary boom extend/retract
switch
7 Red Emergency Stop button
8 Function Override - Aircraft
Protection Package
(if equipped)
9 Battery charge indicator
(option)
Part No. 133549
5 6 7 22
STOP
20 19 18 8
10 Machine not level indicator
light (if equipped)
11 Proportional control handle
for drive function and thumb
rocker for steer function
12 Platform overload indicator
light (if equipped)
13 Glow plug switch (option)
14 Engine idle (rpm) select
switch
· Rabbit and foot switch: foot
switch activated high idle
· Turtle: low idle
· Rabbit: high idle and
quickest battery charging
Z-34/22 Bi-Energy
9 10
F
1
2
E
CREEP
17 16
15 Engine start switch
16 Boom function speed
17 Jib boom up/down switch
18 Secondary boom up/down
19 Primary boom up/down
20 Turntable rotate switch
21 Platform rotate switch
22 Not used
Operator's Manual

Controls

22 15
controller
switch
switch
11
12
22
13
14
9