Advanced Chipset Features - Intel PSB-701LF User Manual

APIC MODE:
To Enable Advanced Programmable Interrupt Controller
MPS VERSION CONTROL FOR OS:
This option is only valid for multiprocessor motherboards as it specifies the
version of the Multiprocessor Specification (MPS) that the motherboard will
use. The MPS is a specification by which PC manufacturers design and build
Intel architecture systems with two or more processors.

4-5. ADVANCED CHIPSET FEATURES

Choose the〝ADVANCED CHIPSET FEATURES〞from the main menu,
the screen shown as below.
DRAM Timing Selectable
X CAS Latency Time
X DRAM RAS# to CAS# Delay
X DRAM RAS# Precharge
X Precharge dealy (tRAS)
X System Memory Frequency
VT-d
AMT BIOS Support
GbE LAN
SOL Support
IDE-R Support
Platform Mng Selection
** VGA Setting **
DVMT Mode
DVMT/ FIXED Memory Size
PCI SERR# NMI
↑↓→←: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
This parameter allows you to configure the system based on the specific
features of the installed chipset.
access to system memory resources, such as DRAM and the external cache.
PSB-701LF USER
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
F6: Fail-Safe Defaults
Chipset Features Setup Screen
'
S MANUAL
Chapter 4 Award BIOS Setup
[By SPD]
Auto
Auto
Auto
Auto
By SPD
[Disabled]
[Enabled]
[Enabled]
Enabled
Enabled
Intel AMD
[DVMT]
[128 MB]
[Disabled]
F7:Optimized Defaults
The chipset manages bus speed and
Item Help
Menu Level ►
Page: 4-9