Table of Contents
Advertisement
ONCHIP IDE DEVICE:
The options for these items are found in its sub menu. By pressing the
<ENTER> key, you are prompt to enter the sub menu of the detailed options
as shown below:
SATA Mode
LEGACY Mode Support
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Descriptions on each item above are as follows:
1. SATA MODE
Set the Serial ATA configuration. When set in Advanced Host
Controller Interface (AHCI) or RAID mode, the SATA controller is set
to Native mode. Configuration options: [IDE] [RAID] [AHCI]
2. LEGACY MODE SUPPORT
Certain OS (Windows 9X/ME) is not supported under Native mode
PSB-701LF USER
Phoenix – Award CMOS Setup Utility
F6:Fail-Safe Defaults
'
S MANUAL
Chapter 4 Award BIOS Setup
OnChip IDE Device
[IDE]
[Enabled]
Item Help
Menu Level ►
F7:Optimized Defaults
Page: 4-13
Advertisement
Table of Contents
