NEC SL1100 Feature Manual page 81

ISSUE 3.5
2. Customize the Dial Action Table options.
Program Program Name
Number
47-13 InMail Dial Action Tables
Key
1 UTRF to XXX
(Unscreened Transfer to user-dialed extension)
2 UTRF to XXX (V3.5 Changed)
(Unscreened Transfer to operator) (V3.5 Changed)
3 UTRF to XXX
(Unscreened Transfer to operator)
4 UND
(Undefined)
5 UND
(Undefined)
6 UND
(Undefined)
7 UND
(Undefined)
8 UND
(Undefined)
9 HNGUP
(Hangup)
0 UTRF to 101
(Unscreened Transfer to operator)
* REC1 to IXXX
(Quick Message with Greeting to user-dialed extension)
# LOGON to IXXX
(Logon to user-dialed mailbox)
Timeout UTRF to 101
(Unscreened Transfer to operator)
3. Set the time limit for dialing commands for the Automated Attendant caller.
Program Program Name
Number
47-08-03 Time Limit for Dialing Com-
mands
(Dialing Timeout)
InMail Feature Manual
The default Dial Action Table dialing options are:
Dial Action Table Default Settings
Dial Action Table 1
Enter the Time Limit for Dialing Commands interval (0~5 seconds).
By default, the interval is 5 seconds.
If the caller waits too long to dial:
• When the associated Dial Action Table has a Timeout action pro-
grammed, the caller routes to that destination.
• When the associated Dial Action Table does not have a Timeout
action programmed, the Instruction Menu repeats three times and
then InMail hangs up.
SL1100
Description
Dial Action Tables
2-16
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
UND
(Undefined)
Description
D
2-63