NEC SL1100 Feature Manual page 67

ISSUE 3.5
5. If the recipient doesn't answer, the system follows the Cascading Message Notification retry
attempt settings and notification will eventually stop if the call is not answered.
6. Once the notification process begins, a new message does not restart the process if it is already
in progress. Once the process ends (e.g., if the message is acknowledged or the maximum
number of callout attempts is reached), the next new message will restart the process.
Message Notification to Pager Numbers
Below a basic overview of how Message Notification works with pager numbers assuming the retry
attempts are at default. The system determines which numbers are internal extensions or external
numbers by the system dial plan settings. Depending on the system, ARS routing maybe needed to
properly route external calls.
1. The subscriber activates Message Notification for their mailbox.
2. When the subscriber receives a new message, InMail immediately dials the pager service.
• InMail waits up to 30 seconds (approximately 5 rings) for ringback, reorder, busy or voice
activity from the called number. If nothing is detected, the callout is considered unanswered.
3. After the pager service answers, InMail waits for the timer PRG 47-01-08 then sends the dial
string in PRG 47-01-07 which causes the pager display to show the subscriber's mailbox number
as well as the number of new messages in the mailbox.
• The notification is considered acknowledged if the subscriber logs onto their mailbox.
• If the notification is not acknowledged (within a programmable time frame, PRG 47-01-12) the
pager notification is repeated (up to the RNA attempts count, PRG 47-20-07).
• If the pager service doesn't answer, the system follows the Cascading Message Notification
rules and notification will eventually stop if the call is not answered.
Guide to Feature Programming
Program Program Name / Description
No.
47-02-20 InMail Station Mailbox Options - Enable E-mail
Notification
47-02-21 InMail Station Mailbox Options - E-mail Address
47-02-22 InMail Station Mailbox Options - Include Mes-
sage as Attachment
47-02-23 InMail Station Mailbox Options - All Message No-
tification Enabled
47-06-18 Group Mailbox Subscriber Options - Enable
Email Notification
47-06-19 Group Mailbox Subscriber Options - Email Ad-
dress
47-06-20 Group Mailbox Subscriber Options - Include Msg
as Attachment
47-06-21 Group Mailbox Subscriber Options - All Message
Notification Enabled
47-18-01 SMTP Setup - SMTP Enabled
Enables the SMTP forwarding feature for the sys-
tem.
47-18-02 SMTP Setup - Server Name
Sets the SMTP server name. If the DNS server set-
ting is not assigned in Program 90-11-11, the IP Ad-
dress must be used instead of the name.
47-18-03 SMTP Setup - SMTP Port
Sets the SMTP server port.
InMail Feature Manual
Input Data
0 = No
1 = Yes
Up to 48 characters
0 = No
1 = Yes
0 = No
1 = Yes
0 = No
1 = Yes
Up to 48 characters
0 = No
1 = Yes
0 = No
1 = Yes
0 = No
1 = Yes
Up to 48 characters
0 ~ 65535
SL1100
C
Default
0
No Setting
1
1
0
No Setting
1
1
0
No Setting
25
2-49