NEC SL1100 Feature Manual page 262

SL1100
2. Assign InMail as the overflow (no answer) destination.
Program
Number
22-11-04
22-11-05
22-11-06
V
3. Set the interval after which unanswered calls should route to the overflow destination.
Program
Number
22-01-07
22-01-08
Programming Department Calling Group Overflow for Screened Transfers (TRFs)
1. Set up the Department Group.
Program
Number
16-02-01
11-07-01
2-244
Program Name
DID Transfer Operation Mode
DID No Answer Destination
Program Name
DID No Answer Recall Time
Program Name
Department Group Assign-
ment for Extensions
Do not use Department Group
1
Department Group Pilot Num-
bers
Description
For each DID required to step over to voice mail, enter the status
taht the call will step over:
1 = Busy
2 = No Answer
3 = Both
By default, the DID transfer operation mode is set to 0 - No trans-
fer.
For each DID required to step over to voice mail, enter the InMail
Ring Group code (102) to make InMail the overflow (no answer)
destination.
By default, the overflow (no answer) destination is Incoming Ring
Group 0.
Description
Enter the interval after which unanswered calls should overflow to
the programmed overflow (no answer) destination.
22-01-07 = DID no answer timer for Incoming ring groups which
by default is set to 20.
22-01-08 = DID no answer timer for Department groups which by
default is set to 60.
Description
Assign telephone extensions to a Department Group.
By default, telephone extensions are assigned to Department Group
1
Assign the InMail extensions to a unique Department Group (e.g.,
2). No other extensions should be in this group.
These extensions are the extensions the system assigns to the In-
Mail.
Be sure to set up the Department Group in order. (For example, the
first extension should be order 1, the second order 2, etc.)
Assign master (pilot) numbers to Department Groups.
ISSUE 3.5
Voice Mail Overflow