NEC SL1100 Feature Manual page 189

ISSUE 3.5
5. If you are going to allow remote logon to use Make Call, enable Trunk-to-Trunk Transfer for all
InMail extensions.
Program Program Name
Number
20-11-14 Class of Service Options
(Hold/Transfer Service) -
Trunk-to-Trunk Transfer Re-
striction
20-06-01 Class of Service for Exten-
sions
Operation
Log On to Subscriber Mailbox.
L (5) Listen to the message for which you want to make a return call.
[Lstn]
MC (62) Dial this code while listening to the message you want to return.
[Not applicable]
• Make Call automatically places a return call to the co-worker that left you the message.
• If your system has Caller ID, Make Call can automatically place a return call to your outside caller.
• If you hear "Your call cannot go through" your system's Caller ID is not properly set up. You go right
back to the listen mode for the message you were listening to when you tried the Make Call.
InMail Feature Manual
For each InMail extension to be used for External Transfer, enter 0
to turn Off Trunk-to-Trunk Transfer Restriction. (Entering 1 disables
Trunk-to-Trunk Transfer).
Assign Class of Service to extensions (1-15).
Using Make Call from your Mailbox
SL1100
Description
M
2-171