Switch Port Commands - D-Link DES-3250TG Command Line Interface Reference Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
The switch port commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Command Parameters
config ports <portlist|all>
speed [auto|10_half|10_full|100_half|100_full|
1000_half|1000_full]
learning [enabled|disabled]
state [enabled|disabled]
show ports <portlist|all>
Each command is listed, in detail, in the following sections.
S P
WITCH
C
OMMANDS
50
5
ORT