Introduction - D-Link DES-3250TG Command Line Interface Reference Manual

DES-3250TG Layer 2 Fast Ethernet Switch User's Guide
The switch can be managed through the switch's serial port, Telnet, or
the Web-based management agent. The Command Line Interface
(CLI) can be used to configure and manage the switch via the serial
port or Telnet interfaces.
This manual provides a reference for all of the commands contained in
the CLI. Configuration and management of the switch via the Web-
based management agent is discussed in the User's Guide.
Accessing the Switch via the Serial Port
The switch's serial port's default settings are as follows:
•
9600 baud
•
no parity
•
8 data bits
•
1 stop bit
A computer running a terminal emulation program capable of emulating
a VT-100 terminal and a serial port configured as above is then
connected to the switch's serial port via an RS-232 DB-9 cable.
I
NTRODUCTION
13
1