Table of Contents
Advertisement
38
A – Telephone operation:
5.9
Call filter
Using the call filter, you can specify up to 3 external telephone numbers
only indicated in the
(= filters
to
), whose signalling can be enabled or disabled (= type of
filter). Enable or disable each apply to all entered telephone numbers.
Telephone number disabled: Calls from a connection with this telephone
number will not be signalled via the tone caller. It is
display.
Allowing calls: Calls from a connection with this telephone number will be
signalled via the tone caller. All other calls will simply be shown in the
display.
Entering tele-
-
phone numbers
Select memory:
input tel. number: maximum 16 digits
Store entry
Using the same sequence you can program up to 3 telephone numbers.
Deleting tele-
You can delete a telephone number again. To do this, select the correspon-
phone numbers
ding filter and confirm "
the left cursor key and confirm using the O.K. key.
Selecting the
-
filter type
Select filter type wählen:
Switching on
Store setting: The selected filter is switched on.
the filter
Switch off
-
call filter
5 Set-up menu
-
-
-
enter PIN
-
-
to
-
confirm change
". Subsequently, delete the number using
-
-
-
enter PIN
-
-
confirm change
or
-
-
-
enter PIN
-
-
confirm change
-
store setting
A – Telephone operation:
5.10
Call delay
With the call delay switched on, signalling of the call by the tone caller is
delayed (a "still" call). The call is shown in the display.
You can accept the call. After the call delay time the call is signalled by the
tone caller.
In this way you can have calls signalled immediately at another telephone
(with the same ISDN line) so that they can be answered there beforehand.
This means that you can set up a kind of executive / secretary function.
Switching on
-
call delay for
one MSN
Select MSN (1. to 3. MSNs), whose call is to be delayed
Store setting
Switching off
-
call delay
Store setting
5.11
Resetting the unit
You can only reset all individual settings. Memory contents such as
telephone numbers remain unchanged. After resetting, it may be necessary
to reenter all individual settings again.
Please note!
You cannot undo the effects of resetting. For security reasons, the PIN
is not reset.
-
Name key allocation ...........................n. c.
Telephone directory............................n. c.
Settings after
Appointment register .........................n. c.
reset
Number redial memory ......................n. c.
Autodial .................................................on
(n. c. = no change)
Pause...........................................30 secs.
Call list ................................................n. c.
Dial bar..................................................off
Hot line .................................................off
Hot line number..................................n. c.
Program bar ..........................................off
Free telephone numbers....................n. c.
Barred numbers..................................n. c.
5
Set-up menu
-
-
-
enter PIN
(display of the current setting) -
-
-
-
enter PIN
(display of the current setting) -
-
-
-
-
enter PIN
-
-
confirm reset
Outgoing ID...........................................on
Incoming ID...........................................on
Camp-on busy .......................................on
PIN ....................................................n. c.
Exchange line seizure.........................n. c.
MSNs .................................................n. c.
Language ........................default language
Call filter................................................off
Numbers for call filter.........................n. c.
Call delay for MSN ................................off
Connection type .................................n. c.
Additional ISDN functions ..................n. c.
Loudspeaker volume...............................4
39
Advertisement
Table of Contents
