Table of Contents
Advertisement
22
A – Telephone operation:
Selecting a telephone number from the call list
(
)
more -
confirm call back -
The entry is deleted automatically after a successful call.
4.2
Entering characters
Letters, punctuation marks and numbers are available as characters. Entry is
performed using the number keys. Every key has several characters
allocated to it. These are printed on the unit's housing.
The current input position is indicated by a flashing square.
Entry of texts (names) is, for example necessary in the case of the
"telephone directory" and "message" functions. Text input is possible if
"
" is displayed in the 2nd line.
In many programming operations, digits also have to be entered (in display
e. g. "
"). Digits and letters can be deleted using the left cursor key (in
display " ").
Selecting
–
–
characters:
Example key 2
letter of the key) –
Next character: After a character has been selected, press the key for the
next character.
Pressing the cursor right key shifts the input marker one place to the right:
You can now select another character. Pressing the right cursor key again
generates a blank.
Delete character: press left cursor key
Example: Input-
Name "OTTO":
ting of a name
4 Comfort functions
select entry -
confirm
-
–
telephone number is dialed
–
(the digit of the key follows the last
(the 1st character appears again)
–
–
-
A – Telephone operation:
4.3
Telephone directory
O.K. key:
Using the telephone directory
The integrated telephone directory has 20 memory locations for entering
telephone numbers with names. If a caller is stored there with his/her
name, this is displayed to you in the case of a call (applies to calls with
(deletion using the left cursor key).
transfer of the telephone number). The telephone can be called in the follo-
wing conditions: In idle condition, in ready-to-dial condition or during a call.
Viewing
-
–
entries
Select memory location (name display):
Enter the fisrst letter of the name using the keyboard (4.2)
Or:
View memories one after the other using the cursor keys
View telephone number
During selection, the name keys programmed with telephone numbers are
displayed in addition to the entries in the telephone directory. It is thus
possible to make a selection out of a maxium of 40 entries.
Autodialing
Once you have selected the desired entry:
telephone
numbers
Telephone number is dialed after lifting the handset
Alternatives
Before lifting the handset: Correcting the telephone number
After selecting an entry: Confirm the
The telephone number can be corrected
You can add further digits. Dialing is performed after lifting the handset or
after switching on open listening / hands-free operation.
Dialing a telephone directory number in ready-to dial condition
After lifting the handset or after switching on open listening / hands-free
operation, select the desired entry from the telephone directory. Confirm
with the O.K. key: The telephone number is dialed.
You can add further digits.
Programming the telephone directory
New entry
-
Enter name (see 4.2; entry absolutely necessary) -
Enter telephone number -
4 Comfort functions
-
using the
-
-
23
Advertisement
Table of Contents
