Table of Contents
Advertisement
40
A – Telephone operation:
Tone caller volume ..................................6
Settings after
Tone caller sequence ..............................5
reset
Tone caller melody ..................................1
Display contrast.......................................3
Charge counter...................................n. c.
(n. c. = no change)
Factor .................................................0.12
Charge display ...................................units
Currency .............................................n. c.
Charge accounts ...................................on
Account names ..................................n. c.
Account amounts ...............................n. c.
Account codes. c.
External diversion..................................on
Forwarding to pager..............................off
Telephone number for forwarding
to pager ..............................................n. c.
5.12
Entering connection type and additional features
You can change the set connection type of your ISDN connection (simple,
comfort, standard). After that, all the additional features that you have
ordered have to be activated or deactivated, so that they can be used.
Deactivation is only offered if a feature is not already included in the connec-
tion type.
-
Select connection type: simple, standard- or comfort -
Select additional ISDN features:
• External diversion (only with simple or standard connection).
• Call charge display (only with simple or standard connection).
• Changeover of identification for outgoing calls
• Changeover of identification for incoming calls
• Sending messages
• Intercept
• Call Diversion
• Transfer connection
Activate feature for use ("
Complete setting changes -
5
Set-up menu
Answering machine ..............................off
Operating mode ..........................n. c.
Text recordings............................n. c.
VIP function ...................................off .
VIP code .............................................n. c.
ADAD operation.............................off
ADAD tel. number.......................n. c.
Automatic listening-in ....................on
Room functions .............................off
Switch on delay .....................3rd ring
Timer..............................................off
Times for timer............................n. c.
Recording ............................unlimited
Message texts....................................n. c.
Leave message.....................................on
-
-
-
Enter PIN
-
-
") or deactivates ("
")
Store
B – Answering device: 1 Start up
1.1
Answering device controls
Keys and lamps (LEDs) of the answering device
A
B
F
A Lamp for key on/off
• Lamp lights up: Answering device is switched on and ready.
• Lamp is off: Answering device is switched off.
B Lamp for playback key
• Lamp lights up: New messages
when all new messages have been heard.
Displays for the answering device
1 2 3
4
5 6
7
A
1
E
Symbols for answering device operation
Functions are active when the corresponding symbol is visible in the display:
1. You can see at a glance which announcements are activated:
1 = Announcement 1, E = Closing announcement or 2 = Announcement 2.
2.
ADAD function
3.
Timer
Answering device is
active.
Display of the recording capacity
With the answering device switched on, you have the following display with
the telephone in idle condition (instead of the date/time display):
Idle condition
"ADD": Number of calls received. "REC": Number of messages recorded
since the last time the answering device was switched on.
"REST": Remaining recording capacity in minutes and seconds.
Switch on/off
Playback new messages
Function key "F" (menu)
were recorded. Lamp goes out a
2
Indicates that an info text is
there for you.
41
Advertisement
Table of Contents
