Set Date And Time; Make A Call - Philips ID937 User Manual

EN

Set date and time

m
1. Press
:
2. Scroll to
m
3. Press
4. Enter the current time (HH:MM). Press
5. Enter the current date (DD/MM/YY).
m
6. Press
WARNING If your phone is connected to an ISDN line through an adaptor, the date & time may
be updated after each call. The availability of date & time update is dependent on your network
provider. Please check the date & time settings in your ISDN system or contact your network
provider.
Now, you are ready to use your phone.
Basic operations of your ID937

Make a call

Enter the phone number (maximum 20 digits) and press
For details, please refer to "Make a call" on page 20.
Answer or end a call
r
Press key to answer a call.
e
Press key to end a call.
For details, please refer to "Answer a call" on page 20 and "End a call" on page 21.
Switch the handset on/off
Press and hold
e
Short press
Keypad lock/unlock
Press and hold
Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains charged
batteries.
p
Short press
Once retrieved, press any key on the handset to end the paging.
18
MENU .
Clock & Alarm and press
Set Date/Time.
SELECT to enter
to confirm.
OK
e
key for 3 seconds to switch off the handset in stand-by mode.
key to switch on the handset again.
F
key for 2 seconds to lock or unlock the keypad in stand-by mode.
key on the base. The handset starts to ring.
Install
m
.
SELECT
2
to select AM or press
r
to dial the number.
j
7
to select PM
.