JRC JCY-1800 Instruction Manual page 25

4.3.4.2. Data TAB screen
Check the entry data, when initial values are entered as record item selected in pre-procedure.
Change entry data, when required.
Enter a setup data when "Other" is selected as record item in pre-procedure.
4.3.4.2.1. Type
Select the type of receiving sentences.
No. Type
1 NMEA
2 AIS
3 DRY-CNT
4 DCNT+A/D
5 A/D
6 NSK
7 NAV－I/F
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
Connector
General sensors
AIS unit
Digital signal converter unit (option)
Equipment with built-in DSC
(Addition of the optional A/D converter board)
Equipment with built-in DSC
(Addition of the optional A/D converter board)
NSK unit (option)
NAV-I/F unit (option)
19
4. Installation, Setup and Check
Selectable CH Remark
CH01-CH32 NMEA
CH01-CH16 NMEA
CH13-CH16 NCT-72/NCT-63
CH13-CH16 NCT-72/NCT-63
(A/D built-in)
CH13-CH16 NCT-72/NCT-63
(A/D built-in)
CH01－CH32 NCT-27B
CH13-CH16 NCT-52A
DOC No. 7ZPNA4014