JRC JCY-1800 Instruction Manual page 147

15.1.2. Set information required for playback with Setup software
(1) Click the [SETUP] button, and start the Setup software.
(2) The Login screens is indicated, and click the [OK] button after confirming that user is selected in the Operator
block.
(3) To import VDR/S-VDR configuration data, select the following file in the download data and click the
[Import] button.
(4) Click the [Folder Selection] button, and select a folder created in accordance with the "3.1.3 Download data
from VDR/S-VDR by Download software".
(5) Click the [Set] button, and setup is completed.
To close the Setup software, click the [Close] button.
JCY-1800/1850 VDR/S-VDR Maintenance Software Instruction Manual
＊: ¥Playlist2¥VDR¥Init¥SysInfo.dat
Download folder
141
15. Playback Software setup
DOC No. 7ZPNA4014