TP-Link TL-WA7510N User Manual page 6

TL-WA7510N
)
Note:
There are differences between the Wireless Settings page in AP Router mode and that in AP
Client Router mode, as shown in Figure 5-26 & Figure 5-27.
1. Wireless settings in AP Router mode
¾
Wireless Radio- Enable or disable the wireless radio.
¾
SSID- Enter a string of up to 32 characters. The same Name (SSID) must be assigned to all
wireless devices in your network. The default SSID is set to be TP-LINK_xxxxxx (xxxxxx
indicates the last unique six characters of each Device's MAC address), which can ensure
your wireless network security. But it is recommended strongly that you change your networks
name (SSID) to a different value. This value is case-sensitive. For example, MYSSID is NOT
the same as MySsid.
¾
Region- Select your region from the pull-down list. This field specifies the region where the
wireless function of the Device can be used. It may be illegal to use the wireless function of
the Device in a region other than one of those specified in this filed. If your country or region is
not listed, please contact your local government agency for assistance.
¾
Channel- This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point. If you select auto, then the Device will select the best channel automatically.
¾
Mode- This field determines the wireless mode which the Device works on.
¾
Max Tx Rate- You can limit the maximum tx rate of the Device through this field. You can
select one of security options listed as the below items.
5GHz 150Mbps Indoor/ Outdoor Wireless Access Point User Guide
Figure 5-26 Wireless Settings in AP Router mode
97