TP-Link TL-WA7510N User Manual page 30

TL-WA7510N
5.9.4 UPnP
Choose menu "Forwarding > UPnP", and then you can view the information about UPnP
(Universal Plug and Play) in the screen as shown in Figure 5-50.
The UPnP feature allows the devices, such as Internet computers, to access the local host
resources or devices as needed. UPnP devices can be automatically discovered by the UPnP
service application on the LAN.
¾ Enable UPnP - UPnP can be enabled or disabled by clicking the Enable or Disable button.
This feature is enabled by default.
¾ Current UPnP Settings List - Displays the current UPnP information.
z App Description - Description about the application which initiates the UPnP request.
z External Port - Port that the Device opened for the application.
z Protocol - Type of protocol that is opened.
z Internal Port - Port that the Device opened for local host.
z IP Address - IP address of the local host which initiates the UPnP request.
z Status - Either Enabled or Disabled. "Enabled" means that port is still active; otherwise,
the port is inactive.
Click the Enable button to enable UPnP.
Click the Disable button to disable UPnP.
Click the Refresh button to update the Current UPnP Settings List.
5GHz 150Mbps Indoor/ Outdoor Wireless Access Point User Guide
Figure 5-50 UPnP
121