TP-Link TL-WA7510N User Manual page 39

TL-WA7510N
¾
Enable Internet Access Control - Select the check box to enable the Internet Access
Control function, and then the Default Filter Policy can take effect.
¾
Rule Name - Here displays the name of the rule and this name is unique.
¾
Host - Here displays the host selected in the corresponding rule.
¾
Target - Here displays the target selected in the corresponding rule.
¾
Schedule - Here displays the schedule selected in the corresponding rule.
¾
Action - Here displays the action the Device takes to deal with the packets. It could be Allow
or Deny. Allow means that the Device permits the packets to go through the Device. Deny
means that the Device rejects the packets to go through the Device.
¾
Status - This field displays the status of the rule. Enabled means the rule will take effect,
Disabled means the rule will not take effect.
¾
Modify - Here you can edit or delete an existing rule.
¾
For example: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in
the LAN to access the Internet, you should follow the settings below:
1. Click the submenu Host of Access Control on the left to enter the Host Setting page. Add a
new entry with the Host Description as Host_1 and MAC Address as 00-11-22-33-44-AA.
2. Click the submenu Target of Access Control on the left to enter the Target Settings page.
Add a new entry with the Target Description as Target_1 and Domain Name as
www.google.com.
3. Click the submenu Schedule of Access Control on the left to enter the Schedule Settings
page. Add a new entry with the Schedule Description as Schedule_1, Day as Sat and Sun,
Start Time as 1800 and Stop Time as 2000.
4. Click the submenu Rule of Access Control on the left to return to the Rule Management
page. Select Enable Internet Access Control and choose "Deny the packets not specified
by any Internet access control rule to pass through the Router".
5. Click Add New... button to add a new rule as follows:
1) In Rule Name field, create a name for the rule. Note that this name should be unique, for
example Rule_1.
2) In Host field, select Host_1.
3) In Target field, select Target_1.
5GHz 150Mbps Indoor/ Outdoor Wireless Access Point User Guide
130