Transportation And Storage; Notes On Warranty - Siemens SIPART PS2 6DR5 series Operating Instructions Manual

Design of the nameplate
SIPART PS2 i/p
6DR5 2 * 0 - * E * 00 - * * A *
-Z A40
Uaux=18...30V
Iw=0/4...20mA
Siemens AG, Industry Sector
76181 Karlsruhe, Germany
www.siemens.com/sipartps2
MADE IN FRANCE
①
Manufacturer
②
Consult operating instructions
③
Safety class
④
Auxiliary power (air supply)
⑤
Approvals
⑥
ATEX/IECEx marking for hazardous area
⑦
FM/CSA marking for hazardous area
Figure 1-1 Nameplate layout, example
1.5

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly packaged to provide sufficient
protection during transport. Siemens cannot assume liability for any costs associated with transportation damages.
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
● Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in "Technical data" (Page 35).
1.6

Notes on warranty

The contents of this manual shall not become part of or modify any prior or existing agreement, commitment or legal
relationship. The sales contract contains all obligations on the part of Siemens as well as the complete and solely applicable
warranty conditions. Any statements regarding device versions described in the manual do not create new warranties or
modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right to make technical changes in
the course of further development.
SIPART PS2 (6DR5...)
A5E03436655-02, 01/2013
Positioner
IP66
NEMA Type 4X
p = 1.4 ... 7 bar
SW: 4.00.00
S N° :
N1A6101234567
Technical data and temperature classes see certificate
ATEX Logo
TÜV10 ATEX555781X / IECEx TUN 09.0020X
II2G Ex ia IIC T6/T4 Gb
0044
IS, Class I, Zone 1, IIC
FM Logo
-
-
#REF!
Install per control Drawing A5E00065622D
-
Nepsi Logo
Inmetro Logo
Ta = -30 ...50(T6)/80(T4)° C
⑧
Manufacturer serial number
⑨
Place of manufacture
⑩
Rated signal range
⑪
Auxiliary power supply
⑫
Ordering supplement (Order code)
⑬
Order number
⑭
Product name
/ TÜV 11.0287
-
- -
-
IS, Class I, Div 1, ABCD
/
5