»
MAINTENANCE WORK ON CHASSIS AND ENGINE
Insert the new lamp such that the noses [1] engage in the recesses [2] .When
doing so, do not touch the glass body of the lamp so that it remains free from
fat. Engage retaining clip, mount rubber cap and connector. If the parking-
light lamp is to be replaced, simply insert it in the holder. Reinsert the park-
ing-light lamp together with the holder.
Engage the bottom end of the headlamp mask at the retaining pins and fix
the mask by means of the rubber bands.
1
2
Exchanging the brake light and tail light bulb (SXC)
Remove the cap [3] on the underside of the license plate retainer.
3
39
Turn the lamp socket [4] approximately 30° counterclockwise and pull it out
of the tail light housing.
4
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.
NOTE: Since the bulb on the tail end is subjected to higher vibrations, heavy-
duty bulbs are available from your KTM dealer.
Exchanging the brake light and tail light bulb (SMC)
Remove seat.
Disengage retaining clip [5] and take bulb out of reflector. When changing
the brake-light lamp, simply pull it out of the holder.
Slightly depress the bulb, turn it approx. 30° counterclockwise and pull it out
of the socket.
To mount the lamp reverse the worksteps indicated above.
6
6
When changing the tail-light lamp [6], simply pull it out of the holder.
5