Table of Contents
Advertisement
AUX playback
You can listen to the sound of the connected
external device through your system's speakers.
1
Check the external device has been properly
connected. (See Installation, Connecting an
additional appliance)
2
Press POWER to on, then press AUX to
select AUX mode.
Display shows :
3
To avoid noise distortion, turn down the volume
on your external device.
4
Press the PLAY key on the connected device to
start playback.
5
To adjust the sound and volume, use the sound
controls on your external equipment and the
MAS 55.
Reset
If desired, you can restore your system to its
default setting.
1
Remove the power plug from the wall socket.
2
Use a ballpoint pen to press the RESET for
more than 30 seconds.
3
Reconnect the power plug .
AM
flashes.
The system is restored to its default setting.
AUX playback/ Sleep
Sleep
You can set a certain period of time after which
the set will switch to standby.
1
Press POWER to on.
2
Press SLEEP repeatedly to select the desired
time period options (in minutes):
Display shows in sequence: SLP 10, 20, 30,
40, 50, 60, 70, 80, 90, 00.
Display shows the selected option briefly and
returns to its previous status.
3
To view the time countdown to the standby
mode, press SLEEP again.
To deactivate the sleep timer, press SLEEP until
SLP 00 is display or press POWER to switch
the system to standby.
Reset
19
Advertisement
Table of Contents
