Table of Contents
Advertisement
Tape Operation / Recording
Preparation for recording
1
Load a recordable tape into tape deck 1 with full
spool to the left.
2
Prepare the source to be recorded.
CD – load a disc.
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 2 with the full spool to the left.
AUX – connect an external audio appliance.
One touch recording
1
Press CD, TUNER or AUX to select the
source.
2
Start playback of the selected source.
3
Press RECORDâ on tape deck 1 to start
recording.
To stop recording
Press STOP•OPEN 70 on tape deck 1.
Helpful hints:
– When recording from AM (MW) radio stations,
adjust BEAT CANCEL to 1 or 2, if necessary, to
reduce interference.
18
Synchro start CD recording
1
Press CD source and if necessary, stop CD
playback.
If desired, program track numbers.
2
Press RECORDâon tape deck 1 to start
recording.
Playing of the CD/program starts
automatically from the beginning. It is not
necessary to start the CD player separately.
To stop recording
Press 70 on tape deck 1
Dubbing tapes
1
Load the prerecorded tape in tape deck 2.
Make sure both tapes have their full spool to the
left.
2
On tape deck 1, press PAUSEÅ and then,
RECORDâ.
3
Press PLAY £ on tape deck 2.
Recording starts.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tape to side B
and repeat steps 1-3.
To stop dubbing
Press 70 on tape deck 1 and 2.
Helpful hints:
– To ensure good dubbing, use tapes of the same
length.
Advertisement
Table of Contents
