Table of Contents
Advertisement
Programming tracks
You may store up to 16 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to
activate programming.
Display shows Pr:01, indicating the start of
the program. PROGRAM appears.
2
Press digits 0 - +10 on remote control or
4 or ¢ to select your desired track. (See
Selecting a different track)
3
Press PROGRAM to store the desired track
number.
Display shows Pr:02 (up to 16 in sequence),
indicating the next program location available.
4
Repeat steps 2 to 3 to select and store all
desired tracks in this way.
5
To play your program, press CD /É Å .
Helpful hints:
– If you store more than 16 tracks, the display will
st
show the 1
track in the program. At this time, you
can still store a new track, but the new track will
st
replace the 1
track in the program.
To review the program
In the stop position, press repeatedly
PROGRAM to see your stored track numbers.
Erasing the program
You can erase the contents of the memory by:
– Opening the CD door;
– Pressing STOPÇtwice during playback and
once in the stop position.
PROGRAM disappears.
Different play modes: REPEAT,
RANDOM and INTRO
You can select and change the various play
modes before or during playback, and combine
the REPEAT or INTRO modes with PROGRAM.
– plays the current track continuously.
REPEAT
REPEAT – repeats the entire disc/program.
RANDOM – tracks of the entire disc are
played in random order.
REPEAT RANDOM – repeats the entire CD
in random order.
INTRO – Each track in the disc/program plays
10 seconds in sequence.
1
To select play modes, press once or more
PRESET/REPEAT or/and RANDOM, or
INTRO.
2
Press CD /É Å to start playback if in the stop
position.
3
To return to normal playback, press PRESET/
REPEAT, RANDOM or INTRO repeatedly
until the various modes are no longer displayed.
You can also open the CD door to cancel
your play mode.
Helpful hints:
– In the program mode, you will exit the program
by pressing RANDOM. To return to the program,
press PROGRAM in the stop position.
– RANDOM mode is cancelled if you press
PROGRAM in the stop position.
CD Operation
15
Advertisement
Table of Contents
