Aux/Sleep/Reset; Aux(Listening To An External Source); Sleep; Reset - Magnavox MAS65 User Manual

AUX ((Listening to an external
source)
You can listen to the sound of the connected
external device through your system's speakers.
1
Check the external device has been properly
connected. (See Installation, Connecting an
additional appliance)
2
Press STANDBY-ON to on, then press AUX
to select AUX mode.
➜ Display shows:
3
To avoid noise distortion, turn down the volume
on your external device.
4
Press the PLAY key on the connected device to
start playback.
5
To adjust the sound and volume, use the sound
controls on your external equipment and the
MAS 65.

Reset

If desired, you can restore your system to its
default setting.
1
Check the system is switched on or to standby
mode (see Basic Functions, Switch on/to
standby)
2
Use a ballpoint pen to press the RESET.
➜ 0: 00 flashes.
➜ The system is restored to its default setting.
AUX/ SLEEP/RESET

SLEEP

You can set a certain period of time after which
the system will switch to standby.
STANDBY-ON
● On the system, press SLEEP repeatedly to
select the desired time period options (in
minutes):
➜
Display shows in sequence: SLEEP: 10, 20,
30, 40, 50, 60, 70, 80, 90, 00.
➜
Display shows the selected option briefly and
returns to its previous status.
To deactivate the sleep timer, press SLEEP until
SLEEP 00 is display or press STANDBY-ON
to switch the system to standby.
RESET
21