Different Play Modes: Shuffle And Repeat; Programming The Disc Tracks; Erasing The Programme - Philips FWM575/37B User Manual

Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
1
Press REPEAT on the remote control to
select:
➜ "REPEAT TRACK" – to repeat playback of
the current track.
➜ "REPEAT DISC" – to repeat playback of
the current disc.
➜ "REPEAT OFF" – to stop repeat function
and playback current disc.
●
To resume normal playback, press REPEAT
until "REPEAT OFF" is displayed.
2
Press SHUFFLE on the remote control to
select:
➜ "SHUFFLE ON" – to random playback of
the current disc.
➜ "SHUFFLE OFF" – to stop shuffle function
and playback current disc.
●
To resume normal playback, press SHUFFLE
until "SHUFFLE OFF" is displayed.
➜
or is shown, except SHUFFLE OFF
REP SHUF
mode.
Note:
– During program play mode or playing a MP3
CD, it is not possible to repeat playback of the
current disc (Repeat Disc mode).

Programming the disc tracks

Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
1
Load the desired discs on the disc tray (refer to
"Loading discs").
2
Press DISC 1/2/3 to select a disc.
3
Press PROG to start programming.
➜
starts flashing.
PROG
4
Press TITLE-/+í/ë repeatedly to select
the desired track.
CD/MP3-CD Operations
●
For MP3 disc, press ALBUM-/+à á and
TITLE-/+í/ë to select the desired
album and title for programming.
5
Press PROG to store the track.
6
To end programming, press STOPÇ once.
➜
stays and the programme mode
PROG
remains active.
➜
The total number of tracks programmed and
the total playing time are displayed.
➜
For MP3 disc, total playing time will not be
shown.
7
To start programme play, pressÉ Å .
➜ "PLAY PROGRAM" is displayed.
Notes:
– It is not possible to create a programme with
MP3 tracks from multiple CDs, or combined with
normal audio tracks.
– If the total playing time is more than "99:59"
then "--:--" is displayed instead of the total
playing time.
– If you attempt to programme more than 99
tracks, "PROGRAM FULL" is displayed.
– During programming, if no button is pressed
within 20 seconds, the system will exit the
programme mode automatically.
To review the programme
●
Stop playback and press TITLE-/+í/ë
repeatedly.
●
To exit review mode, press STOPÇ.

Erasing the programme

●
Press STOPÇ once when playback is stopped
or twice during playback.
➜ disappears and "PROGRAM CLEARED"
PROG
is displayed.
Note:
– The programme will be erased when the system
is disconnected from the power supply or when the
disc tray is opened.
For Recording, please refer to "Tape
Operation/Recording".
19